Setting up projectors

The projectors should be set up as appropriately as possible.

Here, particular attention must be paid to the sharpness, the coverage of the entire area to be played, a sufficient overlap (10-15%) and an initial adjustment of the brightness and the color space.

For a good result it is recommended to operate the projectors in SRGB / Cinema / Multiprojection mode, often a better blending result is also achieved if the projectors are not driven at the maximum brightness level.

It is not advisable to mix projectors of different technology (e.g., DLP / LCOS / LCD / LED).

A common problem is the use of ultra-wide-angle projectors on round surfaces – please note that only a few types of projectors are suitable there to produce a homogeneous image in high quality